Page tree
Skip to end of metadata
Go to start of metadata

USB driver installation for netX hardware with FTDI 2232 USB to SPI controller.


Note:
This installaion ony supports hardware with JTAG and SPM combinations connected to the FTDI chip.
Other combinations like JTAG and COM ports are currently not supported and installed via different installation programs.


SInce V3.0.0.0 of the driver installation, the setup now installs both interfaces (MI_00 and MI_01) of the FTDI chip.
The intefaces are alwas defined as:

  • USB FTDI interface MI_00 => JTAG
    USB FTDI interface MI_00 is always connected to the netX JTAG hardware / if available
  • USB FTDI interface MI_01 => SPM
    if SPM via USB is available on the hardware, than it will be always connected to USB FTDI interface MI_01
  • In an FTDI interfacesis not connected to the hardware, a dummy entry will be installed, preventing  warnings in the windows device manager


Supported hardware:

Board NameUSB IDInterface installation
NXHX-FTDIVID1939_&PID_0021MI_00 = dummy driver
MI_01 = USB SPM
NICEB-SPMVID1939_&PID_0022MI_00 = dummy driver
MI_01 = USB SPM
COMXEB-SPMVID1939_&PID_0025MI_00 = dummy driver
MI_01 = USB SPM
NRPEB-SPMVID1939_&PID_0029MI_00 = USB JTAG
MI_01 = USB SPM
NXHX-SDRSPMVID_1939&PID_002EMI_00 = dummy driver
MI_01 = USB SPM






  • No labels