Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Release Notes
SummarySeveral optimizations and bugfixes on profile implementation
Changes in this version

Changes in v2.1 since v2.0


- Optimization: Replace PROFIdrive Dynamic memory allocation by Static Allocation

- Optimization: serialize handling of Parameter requests in case of multi-Parameter request. Just one parameter per application cycle will be processed in order to minimize the load within application cycle.

- fixed Type of Parameter High-/Low-limits variables. The type of limits variables must depend on the type of Parameter value.

- fixed #9: SendMailbox does not get deleted when shutting down profile/application

- fixed #11: wrong order in parameter 974 initial value. Handling for parameter 974 reworked.

- fixed #10: Access with subindex to non-indexed parameter

- Refuse change request access to Parameter description/text

- Added some functions to support PNU971, PNU977 (load and store parameter Set)  


Changes in v2.0 since v1.2


- Replaced the DC-Motor with a special engine simulation

     - defined some functions to implement a modular controlled system

     - added RFG to the control system

     - used PROFIdrive_Register_CyclicRoutine() to register the Controller as a cyclic routine with variable cycle time          

- Adjusted the application to the new motor interface

     - added motor specific resources as a handle into the general axis resources

     - split Host_Cyclic into several files,        

- Fixed failure ramp-Stop reaction when STW1 bit 5=0 (freeze setpoint)

- Abstract Operation system (RCX) functionality using helper functions (PROFIdrive_APP_Rcx.c)

- Added some comands and flags to map the actual states of setpoint channel and ramp function generator (RFG)

- added static structure to configure Device submodules and and to create optional parameter



Changes in v1.2 since v1.1


- Support PROFIdrive specific data types

- Fixed Fault situations acknowledgement

- added missing check for faulty parameter Description (Low/High Limit and reference Parameter)

- Fixed swap parameter value when an Octet element is requested


Changes in v1.1 since v1.0


- Updated to errata List:

      - Added Error codes Illegal Request (0x21) and Request Block too long (0xB1) (Errata item 18 and 32)

      - Defined Error (to much parameter requested) 0x22 if the number of  permissible  requested parameters is exceeded (Errata item 34)

- Fixed handling of String Parameters (Errata item 36)

- Fixed number of parameter in case of  negative Response (Errata item 41)

- Extended Parameter Request/Response block sizes (up to 1024 Block)

- Updated Host application and Profile resources

- Added handling of  V2 Data type

- Fixed Parameter text handling

- Added handling of Parameters P61000 to P610004 (PROFINET specific Parameters)

- Implemented handling to create a Parameter block

- Added the complete and optional   Fault Buffer configuration

- Implemented handling to register a parameter for notification services

- Added support for I&M Record






Reihenfolge: type, key, summary, fixversion, status, resolution

Known Issues

T Key Summary Fix Version/s Status Resolution

Reihenfolge: type, key, summary, fixversion, status, resolution


Return to overview page...



  • No labels