Page tree
Skip to end of metadata
Go to start of metadata

This error is returned by several API functions to show that the actual communication channel is NOT available.

Without the ready signal of a communication channel it is not possible to communicate with such a channel, because the firmware does not work.
This could also happen after a channel reset, if the  communication channel firmware does not startup correctly or hang.


Following Reasons may apply:

  • No firmware containing a communication channel is loaded and starten on the hardware (e.g. 2nd Stage Loader is running)
  • Internal hardware error, resource problem or a deadlog situation inside the protocol stack firmware
  • Wrong parameters or invalid configuration information inside the firmware